{"product_id":"1-3lb-dead-blow-tpu-mallet-petg-cf-core-2-sizes","title":"1.3Lb Dead Blow Tpu Mallet \u0026 Petg-Cf Core 2 Sizes","description":"\u003cp\u003e1lb 3oz Dead Blow TPU hammer - TWO SIZESTPU outer handle with a PETG-CF Core. (Printed separately then assembled using E6000) TPU Head. 4oz Steel Shot - Has a nice dead blow. TWO SIZES - 310mm For H2D and 250mm For X1C\/P Series Printers - Short weighs 45 grams less than long. A very handy tool for around the house. When you need a judicious application of kinetic energy but you don't want to damage the thing you are hitting. Great for assembling furniture, those tinker toy wine racks and all manner of woodworking… and more. It is of course not suitable for driving railroad spikes, seating piston cylinder sleeves into semi truck engine blocks or any mining of any kind… ;) Rugged TPU Head is durable and wont scratch up surfaces. 2 Profiles: TPU Hammer Head \u0026amp; Handle \u0026amp; PETG-CF Core - Optimized for Bambu Lab TPU 95A HF and Bambu Lab PETG-CF - Choose the LONG or SHORT option depending on your printer. Requires 4oz of steel shot. You don't want stainless steel, You want regular or chrome steel so you can use a magnet. More on that later. This 4oz bag of 3mm shot worked perfectly and provides a very dead blow with zero bounce. 4oz 3mm Chrome Steel Balls AmazonIMPORTANT ASSEMBLY INSTUCTIONS: 2 Part Epoxy Adhesive is the recommended glue to use. You need maximum strength and flexibility. We use JB Kwik Weld 2 Part Epoxy - Amazon Link) It is a little smelly but used correctly it completely bonds the head to the handle. It is however cheap, easy to use and easy to get. You can not use anything that air dries as the handle fits inside the head tight enough to keep the air out. That is why a 2 part epoxy works best. HANDLE\/CORE: Smear a thin coat of the glue of your choice on the lower part of the handle then slide in the core. You may have to tap it home with a hammer. Makes sure to align the hanging hole. E600 works great for this as you don't want an instant set while you position the grip. Wipe off excess and let dry for 24 hours. HEAD\/HANDLE: Pour the steel balls into the head and USE MAGNETS to keep the balls to both sides so you don't glue any of the balls together or to the handle during assembly. A nice blob of mixed Kwik Weld on the top of the handle and a schmear around the circumference near the top will do it then carefully install the handle until FULLY SEATED in the socket and pay attention that you get good glue contact between the handle and the TPU heads collar. It will ooze up and you insert the handle. Better to have to wipe some off than not have enough. Wipe off any excess and place the assembled hammer at rest vertically and allow to dry for 24 hours. Remove magnets AFTER glue has dried. That's it… It's Hammertime!\u003c\/p\u003e\n\n\u003cp\u003eOriginal model by BattCave on MakerWorld: https:\/\/makerworld.com\/en\/models\/1463173-1-3lb-dead-blow-tpu-mallet-petg-cf-core-2-sizes\u003c\/p\u003e","brand":"BattCave","offers":[{"title":"Default Title","offer_id":43771767259201,"sku":null,"price":20.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/0115\/1297\/files\/2025-05-28_2132aa7ae88858.webp?v=1776141144","url":"https:\/\/schnappscaps.com\/products\/1-3lb-dead-blow-tpu-mallet-petg-cf-core-2-sizes","provider":"Schnapps Caps \u0026 3D Printing","version":"1.0","type":"link"}