Filament Spool Dry Box - Petg Box - Tpu Lid

Filament Spool Dry Box - PETG Box - TPU Lid - Desiccant InsertStore your dried filament in these boxes and keep them nice and fresh for your next print. PETG box with a slip on TPU lid that fits snugly to keep any moisture out. Add the 3-5mm desiccant of your choosing to the insert to keep it cracker dry inside. TPU plug keeps the desiccant in the insert. This does not dry filament, it just keeps it that way after a proper drying. PETG Box prints in vase mode with a .8 nozzle to generate one wall 1.7mm thick. Strong enough, decent visibility & no seam running the length of the container. TPU Lid prints with a standard .4 nozzle. You can use any plate, but I prefer the effects plate. TPU prints very easily on them. Smooth or textured will be fine too, just be sure to use a release agent with TPU on the textured plate. We use Dimafix. TPU 95A HF Recommended but you an use any TPU. TPU for AMS might be fine but I have not tried it. Desiccant insert prints in PLA/PLA+ and Desiccant Insert Plug prints in TPU. Insert has a spot for the standard hygrometer. (See BOM) Use desiccant that is 3mm or larger. 3-5mm is the most common size. 4 Profiles - PETG Main Box .8 Nozzle Vase Mode - TPU lid with standard .4 Nozzle. - Desiccant PLA Insert - Insert TPU Plug Examples printed in Bambu PETG Translucent Clear, Ziro Purple TPU & Bambu Lab Matte White PLA.

Original model by BattCave on MakerWorld: https://makerworld.com/en/models/1617693-filament-spool-dry-box-petg-box-tpu-lid