Bambu Lab Spool Stealth Snap In Filament Clip Pla+

Bambu Lab Spool Stealth Snap In Filament Clip PLA+ For best results use PLA+/Pro – Standard PLA will give mixed results. Ultra low profile clip that presses in firmly from the inside of the spool to be a permanent filament clip for the life of the spool. Will work on any Bambu Spool with the 3.6mm Holes and no more than 3.6mm thick. Micro-fins lock it in. Attach ONCE and be done with it for the life of the roll. It will not interfere with printing or storing on a rack. Be sure to align the hole before pushing it through otherwise you can rotate it with small tool. These are TINY so filament matters. They fit perfectly tight with Sunlu PLA+. If you have trouble with size, try another filament. Considering how much filament they take, experimenting is cheap. :P 100% AMS Compatible - Align spool so the clip clears the funnel when rotating on the RIGHT side of the spool. (Double check your AMS, an odd revision could be out there that wants it on the left but everything I have seen shows the right side being the correct side) Example printed in Sunlu Gray PLA+

Original model by BattCave on MakerWorld: https://makerworld.com/en/models/927792-bambu-lab-spool-stealth-snap-in-filament-clip-pla