Bambu Pla-Cf C-Clamp - Small & Strong

Bambu PLA-CF C-Clamp - Small & Strong Bambu's PLA-CF really exceeded expectations with strength and ease of printing so I designed this C-Clamp to give folks something to do with all of those sample spools of PLA-CF. 87mm Long - 15mm Thick - Very Strong. Main Clamp & Screw are PLA-CF - The Foot is printed in PLA/PLA+ and snaps right on to the screw. Snug supports are used on the bottom radius of the clamp. PRO TIP: They will peel right off if you remove them right away. As PLA-CF sets the supports become more difficult to remove. A small tool like a little flat blade screwdriver helps here. Then hit it with a heat gun to bring back that nice matte black finish so don't worry about scratching it up cleaning off the supports. The screw requires ZERO support. Example printed in Bambu PLA-CF Black and Elegoo Rapid PLA+ Silver.

Original model by BattCave on MakerWorld: https://makerworld.com/en/models/916166-bambu-pla-cf-c-clamp-small-strong